If you followed the above directions regarding Standard Shim Spacing, you should have no problem with Short Dogear Spacing. Simply take the difference and install!įor example, if you take the measurement, and you measure 9/16″, you’ll need a 1/16″ Shim. If you measure taller than that, and you need a shim. Since the cover of a Standard Dogear is 7/16″ High, and you need 1/16″ String Clearance, you need 1/2″ from the bottom of the string to the top of the guitar for ideal dogear height. Measure the distance from the top of the pole piece to the bottom of the string.Have a ruler handy, and push your low E string down at the highest fret.You only have to do this on the Low E and High E strings. The ideal pickup height is 1/16″ (0.06″, 1.6mm) from the top of the pole piece, to the bottom of the string- when pushed down at the highest fret. Let’s dig into how we can measure for Shims if you need one (or two)!īefore we talk about Shims, let’s get into pickup height. Sure, P90’s have adjustable pole pieces, but, those are for micro-fine-tuning the string-to-string balance, not adjusting the entire pickup. Since Dogears are Fixed-height pickups, this is the only way to get around it. The purpose of a Dogear Shim is to help raise the pickup to its ideal height.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |